TM 9-4120-407-14
c. Assembly.
(1) Install new load spring (22) and ball bearing (21) into end shield (3).
(2) Install ball bearing (20) into end shield (2).
(3) Connect wire leads (19) onto thermostat (18) per tags and wiring diagram Figure 3-5. See
(4) Carefully install thermostat (18) in location noted during disassembly.
(5) Install box (17) and two screws (16).
(6) Connect wire leads (15) onto connector (14) per tags and wiring diagram Figure 3-5. See
(7) Install four screws (13), flat washers (12), new lock washers (11), and nuts (10).
(8) Install cover (9) and two screws (8).
(9) Align match mark made during disassembly and carefully assemble end shield (3) onto frame (1).
Gently tap end shield into place.
(10) Carefully install rotor (7).
(11) Align match mark made during disassembly and carefully assemble end shield (2) onto frame (1).
Gently tap end shield into place.
(12) Install four studs (6), new lock washers (5) and nuts (4).
NOTE
FOLLOW-ON MAINTENANCE:
4-11. SERVICE MANIFOLD INSTALLATION.
This task covers:
a. Installation
b. Removal
Tools
Materials/Parts
Refrigeration Unit Service Tool Kit
a.
Installation
(1) Remove six screws (1), lock washers (2), flat washers (3), and one access (service valves) cover (4).
4-26