TM 9-4520-260-13
4-16.
FUEL PUMP - CONTINUED
CLEANING
1.
If required, install fittings (4 and 7). Tighten securely. Position elbow (7), as shown.
2.
Secure fuel pump and EMI filter assembly (5) to the heater case with lock washers (11) and nuts (10).
3.
Connect electrical lead connector (9).
4.
Connect 11. 5-inch hose (6) to elbow (7) on fuel pump, and to carburetor (8).
5.
Connect 7-inch hose (1) to elbow (2) on strainer (3), and to male connector (4) on fuel pump (5).
TESTING
1.
Connect the power plug and turn on the fuel supply.
2.
Start the heater (para 2-10) and check for leaks and proper operation.
4-27