4-22. CONTROL PANEL - CONTINUED
Figure 4-20. Repair of Control Panel and Components.
2. THERMOSTAT RECEPTACLE.
One attaching screw also attaches capacitor wire but capacitor will remain attached to
control panel when removing thermostat receptacle.
a. Remove four screws (9), lockwashers (11), and nuts (10) from panel (8).
b. Remove thermostat receptacle (7), cap and chain (13), and gasket (14) from panel (8).
c. Unthread endbell (1) from connector body (2).
d. Slide the exposed ferrule (3) and grommet (4) out of the connector body and down the wires.