2-11. PREPARATION FOR USE (cont)
(1) Fuel Tank Assembly. (cont)
(b) Disconnect all hoses (3) and remove four screws (4),
four washers (5), and four clamps (6).
(c) Turn male connector plug (7) counterclockwise and
(d) Lift out fuel tank assembly.
Screw and washer above fuel level sight gage (8)
will not come out unless fuel level sight gage is
(e) Remove twelve wingnuts (9), eleven screws (10), and
eleven washers (11) on cover assembly (12), and
remove cover assembly.
(f) Pour fuel out and clean with cleaning compound
(item 3, app C) using rag (item 14, app C).