TM 9-4910-387-14-1
4-10. TROUBLESHOOTING INFORMATION (cont)
Table 4-3. TROUBLESHOOTING (cont)
MALFUNCTION
TEST OR INSPECTION
LOCATION
CORRECTIVE ACTION
RH CONTROL EQUIPMENT ASSEMBLY (cont)
2. LUBE HEAT LIGHT (1) DOES NOT LIGHT .
Remove RH panel assembly. Turn lens cap (2) counterclockwise
and remove clear lens (3), lens cap (2), and legend plate (4). Pull
out indicator light (5) through rear of RH control panel (6). Check
lamp (7) to see if burned out by installing in a known operational
indicator receptacle.
a. Replace lamp (TM 9-4910-387-24P) if required.
b. If the above procedure does not correct fault, notify next
higher level of maintenance.
4-18