TM 9-4910-387-14-1
3. COUNTING LIGHT (1) DOES NOT LIGHT UP WHEN START BUTTON
IS PRESSED.
Remove RH panel assembly. Turn lens cap (2) counterclockwise and remove
amber lens (3), lens cap (2), and legend plate (4). Pull out indicator light (5)
through rear of RH control panel (6). Check lamp (7) to see if burned out by
installing in a known operational indicator receptacle.
a. Replace lamp (TM 9-4910-387-24P) if required.
b. If the above procedure does not correct fault, notify next higher level of
maintenance.
4-19