TM 9-4910-387-14-2
6-2. TROUBLESHOOTING (cont)
E. STARTER FORWARD COIL MAY BE DEFECTIVE
.
NOTE
1 Connect one multimeter lead to
starter contact C1
(1) and connect
other lead to starter contact C8 (2).
2 Check for approximate resistance reading of
100 ohms.
If
resistance is not present, replace the starter (p 6-219).
3 If main drive motor fails to start, proceed to step F.
F. STARTER THERMAL HEATERS' BUS BAR CONTACTS MAY BE DEFECT.VE
I
NOTE
Ensure thermal heaters are reset by pushing in on the RESET bar (1).
Some testers have starters which contain only two heaters.
1 Connect one multimeter lead to
thermal heater contact (2) and
connect other lead to thermal heater contact (3).
6-16