TM 9-4910-387-14-2
62. TROUBLESHOOTING (cont)
I. WIRE MAY BE OPEN FROM STARTER
J. MAIN DRIVE MOTOR MAY BE
TO MAIN DRIVE MOTOR. (cont)
DEFECTIVE.
NOTE
Wires from main drive mo-
4.
Check for continuity. If
continuity does not exist, replace the wire (p 6-219).
tor are tagged for identifi-
tor are tagged for identifi-
cation. Remove tape from
5. If main drive motor fails to start, proceed to step J.
wire ends to make conti-
nuity checks. After making
checks, apply new tape
1 Remove cover from wire outlet box on main drive motor. Connect
one multimeter lead to the wire tagged no. 1. Connect other lead to
the wire tagged no. 7.
2 Remove both leads. Connect one multimeter lead to
wire tagged
no. 2. Connect the other lead to the wire tagged no. 8.
3 Remove both leads. Connect one multimeter lead to
wire tagged
no. 3. Connect the other lead to the wire tagged no. 9.
4 Check for continuity. If no
continuity exists, replace the main drive
6-22