TM 9 4910-387-14-2
6-2.
TROUBLESHOOTING (cont)
C.
WIRES MAY BE OPEN. (cont)
D.
HIGH SPEED MICROSWITCH MAY BE DEFECTIVE.
4 Check for continuity. If continuity is not present,
high speed microswitch contact
(1) and connect the other lead
5 If drive speed of tester will not in crease,
to high speed microswitch
proceed to step D.
contact (2).
2 Push up on contact arm (3) on
high speed microswitch (4).
3 Check for continuity. If continuity is not present, replace the remote
4 If drive speed of tester will not increase, proceed to step E.
6-130