TM 9-4910-387-14-2
Remove.
WARNING
A press may be needed to remove flywheel from
bushing. Grasp shouldered shaft tightly at a smooth
location, not at keyway, and hold as pressure is
applied. Shouldered shaft will drop as pressure is
applied and could cause injury.
17. FLYWHEEL (26). Remove from bushing (27).
18. SETSCREW (28). Loosen.
WARNING
A press or gear puller may be needed to remove
bushing from shouldered shaft. Grasp shouldered
shaft tightly at a smooth location, not at keyway, and
hold as pressure is applied. Shouldered shaft will drop
as pressure is applied and could cause injury.
19. BUSHING (27) AND KEY (29).
Remove from shouldered shaft (23).
6-179