TM 9-4910-387-14-2
6-5. RH CONTROL EQUIPMENT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY OF RH MOUNTING BOARD ASSEMBLY (cont)
38 THREE WIRES. Solder bare ends to
stepping relay coil contact
(45), latching relay coil contact (46), and latching relay contact (47).
Position other ends with terminal lugs on terminal D7.
39 SCREW (48). Install through three terminal lugs into terminal D7.
40 WIRE. Solder bare end to
latching relay contact (49) and position
other end with terminal lug on terminal D8.
41 WIRE WITH TWO TERMINAL LUGS. Position one end on terminal
C11 and other end on terminal D8.
42 SCREW (50). Install through terminal lug into terminal C11.
43 SCREW (51). Install through two terminal lugs into terminal D8.
6-206