TM 9-4910-595-14&P
RIM PART NUMBER LOCATIONS
Check part numbers of all rim components; the base,
side ring, or flange and lock ring rims and components
are stamped with their proper part number.
Be certain you have mated parts by checking the part
number of all the rim components.
The location of these part numbers on the various rims
can be found as shown in these typical examples:
TWO-PIECE TRUCK RIMS
Two-piece truck rims have rim base part
number located as shown on inside diameter or wheel
side of rim base adjacent to butt weld area of rim base.
Side ring part number is stamped on outside face as
shown 2" to 4" left of the split in side ring.
THREE-PIECE TRUCK RIMS
Three-piece truck rims have rim base part
number located as shown on inside diameter or wheel
side of rim base adjacent to butt weld area of rim base.
The flange part number is stamped on the outside face
as shown 2" to 4" to the right of the butt weld area of
flange. Split bead ring part number is stamped on
outside face of bead or lock ring 2" to 4" to the right of
split in ring.
SEMI-DROP CENTER RIMS--GRADER and FRONT
END LOADER TYPES
Semi-drop center grader type or front end loader
type rims have rim base part number stamped on inside
diameter or wheel side of rim base as shown adjacent to
the butt weld area of rim base. Side flange part number
is stamped on outside face of side flange 2" to 4" to the
left of the butt weld area of side flange. The split lock
ring has the part number stamped inside of ring and
cannot be seen when mounted. The part number is
located on flat face as shown adjacent to the safety
hump away from split in lock ring.
MULTIPLE PIECE EARTHMOVER RIMS
Earthmover multiple piece rims are stamped as
follows: Rim base part number is stamped on upset
back lip of rim base on outside face of rim base as
shown to the right of the flange driver notch, Both inside
and outside flanges must have the same part number,
and this number is stamped on the outside face of each
flange adjacent to the butt weld area of the flanges. The
bead seat band (the long tapered five degree band) has
the part number stamped on the outside of upset or lip
portion of bead seat band midway between the pry bar
pockets and 180from driver or driver notch. The split
lock ring part number is located on inside face of lock
ring and cannot be seen when rim is mounted. The
number is stamped on flat face of lock ring as shown 6"
to 8" left of split in lock ring.
3