TM 9-4910-663-12
High voltages that are dangerous to life are used
in the test stand. Avoid contact with conducting
parts. Turn off input power whenever possible be-
fore connecting or disconnecting test equipment.
The test stand contains rapidly rotating parts.
Make certain that all parts that rotate are
securely attached before operating the test
stand.
The noise level during operation of the test
stand is high. To protect hearing, wear an
acoustical ear muff.
Never connect
for the front panel meters. Some
binding posts
have millivolt movements that may
of the meters
be damaged by
Section III.
MAINTENANCE
3-7. OPERATOR MAINTENANCE. Maintenance of the test stand at the
operator maintenance level is limited to inspection, test, service and
replacing defective indicator lamps and knobs. Unscrew the torpedo
lens and check the indicator lamp for defective filament. Replace
defective lamps.
Change 1
3-3