CONTINUED (REMOUNTING TIRE FROM DIVCO WHEEL)
E. Turn the wheel until the valve stem is again in a
6 o'clock position. Repeat steps "D" to demount the
second bead as shown at left.
4. DIVCO SEMI-DROP CENTER LIGHT TRUCK WHEELS (MOUNTING)
A. Chuck the wheel on the machine and rotate it until
B. Use the Dress wheel to push on the second bead.
the valve hole is at 6 o'clock. Generously lubricate
Turn the wheel intermittently, allowing the bead to
both beads and manually slip the first bead over the
snap into place. Install the lock ring and inflate.
edge of the wheel, Position the valve stem at 6
o'clock and pull it through the hole in the wheel.