TM 9-4910-707-14&P
5. REMOUNTING DUPLEX OR SUPER SINGLE TRUCK TIRE ASSEMBLIES
B. Install the offset arm (part # 8782) and press
A. Chuck the rim or wheel with the flange near-
wheel in the left-hand side of the carriage, break
est the drop center facing away from the chuck.
bead and lubricate thoroughly with
Install the press wheel in right-hand side of
carriage and break the outside bead.
NAS
1101-06-12.
D. Place the remaining bead of the tire into the
C. Install the duplex tool into both carraigee
rim well. Continue to remove the tire as shown
sockets and pin. L u b r i c a t e the bead with NAS
above.
1101-0612, Remove the first bead as shown above.
15