TM9-4935-481-14-1
Table 3-11. DMS-D Performance Test-Continued
Table 3-11. DMS-D Performance Test-Continued
STEP
UNIT
PROCEDURE
CORRECTIVE ACTION
STEP
UNIT
PROCEDURE
CORRECTIVE ACTION
887
DMM
Observe a reading of -7.463 to -7.538 Vdc.
899
CIP
COUNTER INHIBIT(SEC) dial to 19.05.
900
CIP
RUN/HOLD/OFF switch to RUN.
Replace card A7. Check A7 pins
901
PPE
Set SEQUENCE switch to the positions indicated and observe the
83, 94, 62 and 63.
DMM reading for each switch setting.
888
CIP
RUN/HOLD/OFF switch to HOLD.
889
CIP
COUNTER INHIBIT(SEC) dial to 17.76.
SEQUENCE
Reading
890
CIP
RUN/HOLD/OFF switch to RUN.
891
DMM
Observe a reading of -0.0050 to +0.0050 Vdc.
902
AUTO 2, 3, 4, 6
+6.368 to +6.432 Vdc
(120)
Replace card A7. Check A7 pins
83, 94, 62 and 63.
903
AUTO 5
+5.771 to +5.829 Vdc
(121)
HorizontalAutomatic
904
CIP
RUN/HOLD/OFF switch to HOLD.
892
MCP
SELECTOR A switch to F5.
905
CIP
COUNTER INHIBIT(SEC) dial to 19.21.
893
CIP
COUNTER INHIBIT(SEC) dial to 19.03.
906
CIP
RUN/HOLD/OFF switch to RUN.
894
ITP
INTERNAL TEST switch to 2.
907
PPE
Set SEQUENCE switch to the positions indicated and observe the
DMM reading for each switch setting.
895
PPE
Momentarily actuate TEST START switch and observe a reading of
DMM
+0.4900 to +0.5100 Vdc for SEQUENCE switch positions AUTO 2
SEQUENCE
Reading
through AUTO 6.
908
AUTO 2, 3, 4, 5
-0.0050 to +0.0050 Vdc
(119)
Replace card A7. Check A7
pin 78.
896
ITP
INTERNAL TEST switch to 3.
909
AUTO 6
+6.368 to +6.432 Vdc
Replace card A7. Check pins
897
DMM
Observe a reading of -0.4900 to -0.5100 Vdc for SEQUENCE switch
80 and 76.
PPE
positions AUTO 2 through AUTO 6.
Replace card A8. Check A8
pins 60 and 4.
898
CIP
RUN/HOLD/OFF switch to HOLD.
3-110