C2
TM 9-4935-481-14-2
SAFETY SUMMARY
solvent cleaning operations shall be discarded into an approved container.
The following are general safety precautions that personnel must understand and apply during operation and maintenance.
CAUTION
KEEP AWAY FROM LIVE CIRCUITS
Unresolved Plus S. G. must be confined to the immediate work area only. It attacks most plastic and must not be spilled on
Operating personnel must observe safety regulations at all times. Do not replace components or make adjustments inside
other parts.
the equipment with high voltage present. Under certain conditions, dangerous potentials may exist when the power control is
in the off position. To avoid injury, remove power and discharge and ground a circuit before touching it.
DO NOT SERVICE OR ADJUST ALONE
Under no circumstances should any person reach into the enclosure for the purpose of servicing or adjusting the equipment
except in the presence of someone who is capable of rendering aid.
Personnel working with or near high voltages should be familiar with modern methods of resuscitation.
The following are specific safety precautions which are printed elsewhere in this manual, and are repeated herein in similar
WARNING
In view of the toxic and volatile nature of materials used in the application of adhesive, paints, and
conformal coatings, ensure the area of application has adequate ventilation. Avoid breathing fumes
Avoid skin and eye contact by wearing protective gloves and goggles. If contact occurs, wash with
water and soap and report to a first aid station. Flammables must be kept away from flames, sparks,
and excessive heat. Solvents shall be stored in and used from approved safety containers which shall
be sealed when not in use. All cloths used for
v