TM 9-2330-211-14&P
Section II. SERVICE UPON RECEIPT
Page
Page
Preliminary Servicing and
Service Upon Receipt of Material . . . . .
Adjustment of Equipment . . . . . . . . . . . .
4-5.
SERVICE UPON RECEIPT OF MATERIAL
ACTION
ITEM
REMARKS
LOCATION
Attached to
DD Form 1397
Read and follow all instructions.
1.
conspicuous part
of semitrailer
Metal strapping,
Remove.
2.
plywood, tapes,
seats, and wrappings
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Always
wear protective goggles and gloves, and use only in a
well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near
open flame or excessive heat. The solvent's flash point is
100F - 138F (38C - 59C). If you become dizzy while
using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts eyes, immediately wash
your eyes and get medical aid.
Coated exterior parts
Remove rust preventive compound with dry cleaning
3.
a.
Inspect for damage received during shipping.
Semitrailer
4.
If damage is found, submit DD Form 6, Package
b.
Improvement Report.
Equipment packing slip
a.
Check against equipment to see if shipment is
5.
complete.
Report all discrepancies in accordance with
b.
instructions in DA Pam 738-750.
4-6.
PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT
Perform the Operator/Crew and Unit Preventive Maintenance Checks and Services (PMCS) contained in Chapters 2
and 4 of this manual.
Lubricate all points as shown in the Lubrication Chart, regardless of interval (para 3-2).
Schedule the next Preventive Maintenance Checks and Services (PMCS) on DD Form 314, Preventive Maintenance
Schedule and Record.
4-2