TM 9-2590-506-13&P
Table 3-1. Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7.
PRESSURE CAP CANNOT BE REMOVED FROM FUEL PRESS ADAPTOR.
Check that pressure cap (1) is clean and free of foreign matter.
a.
Clean pressure cap. If clean, lightly tap pressure cap and rotate it counter-clockwise.
b.
If pressure cap still cannot be removed, notify direct support maintenance.
8.
3-LUG BAYONET TYPE NOZZLE CANNOT BE INSTALLED ON FUEL PRESS ADAPTOR.
Check that fuel press adaptor (1) is clean and free of foreign matter.
a.
Check 3-lug bayonet type nozzle to ensure it is in the closed and locked condition.
b.
Clean fuel press adaptor. If clean, inspect to determine if defective.
c.
Check poppet (2) for freedom of movement, press straight down on poppet.
d.
If nozzle still cannot be installed, notify direct support maintenance.
TA255007
3-6