TM 9-2590-506-13&P
5-13. DUST COVER ASSEMBLY MAINTENANCE
INSTRUCTIONS (Continued)
a. Removal.
(1) Remove screw (1), washer (2) and safety
chain (5) from adaptor (3).
(2) Separate dust cover assembly (4) from
adaptor (3).
b. Cleaning. Clean dust cover assembly parts as
c. Repair. Repair is limited to replacement of dust
cover assembly.
d. Installation.
(1) Attach safety chain (5) to adaptor (3) with
washer (2) and screw (1). Tighten screw
to 160 to 200 pound-inches.
(2) Install dust cover assembly (4) on adaptor
(3).
5-14. PRESSURE CAP MAINTENANCE INSTRUCTIONS.
This task covers:
a. Removal
d. Repair
b. Cleaning
e. Installation
c. Inspection
INITIAL SETUP
Tools, Special Tools and Test Equipment
Condition Description
Cross Tip Screwdriver, No. 2
None
Materials/Parts
Special Environmental Conditions
None
None
Personnel Required
One
TA255026
5-17