SECTION I. INTRODUCTION
a. This bulletin for Crane, Floating, Revolving, 60-Ton Capacity, Design 413D, is intended as an aid in
Identification, procurement, requisitioning, assembly, storage, and issue of operating equipment, operating
supplies, onboard repair parts, and accessory-items aboard the vessel..
b. The Boat Set will be issued initially complete by ATCOM.
c. Requisitions for replacement of component items will be submitted to the managing activity having
d. When watercraft is transferred or returned to inactive status, the Boat Set will be complete and turned
in with the vessel.
Format of Technical Bulletin. This technical bulletin is divided into the following sections:
a. Section II - Operating Equipment. This section lists equipment necessary for the operation of the
vessel exclusive of accessory equipment. - i.
b. Section lIl - Operating Supplies. This section lists operating supplies which are consumed in use
exclusive of repair parts. They are required for the operation, maintenance, health and welfare of the crew.
c. Section IV - On Board Repair Parts. This section lists repair parts issued and required on board the
vessel at all times when on active status. Due to configuration differences, it will be necessary to reflect hull
numbers where differences exist.
d. Section V - Accessory Items. This section lists accessory equipment on board which are installed by
the manufacturer or by the Issuing agency and are considered as a part of the basic configuration of the
Excess Items. This bulletin does not constitute authorization for excessing or disposing of any
operating equipment, supplies, or on board spare parts which are currently on board or marked for this vessel.
Excess items will be exhausted by normal attrition. .
Composition: of Technical Bulletin
. The component listing within each section
is in alphabetical
sequence-by item name and contains the following data:
a. National Stock Number (NSN). A number listed in this publication for use in all supply operations.
b. Description. The item descriptions included are listed in alphabetical sequence by item name, with
additional-descriptive information required for identification:
(1) Manufacturer's Code, part numbers, and/or the applicable specification references.
(2) Pertinent information and notes applicable to the set follow the last component.
c. Quantity Per Set (Qty). This column lists the quantities of each component authorized.
d. Expendability - Recoverability (Rec) Code. This one digit code indicates the method or condition
under which the repair parts can be recovered. Absence of a code indicates the item is expendable.
Codes that appear are defined as follows:
Non-repairable item. When unserviceable, condemn and dispose at
the level indicated by source, maintenance, and recoverability code.
Reparable item. When uneconomically repairable, condemn and
dispose at organizational level.