TB 55-1935-204-12
SECTION I. INTRODUCTION
1. General.
a. This bulletin for Crane, Barge, Diesel Electric, 100 short ton capacity, Design 264B, is intended as an
aid in identification, procurement, requisitioning, assembly, storage, and issue of operating equipment,
operating supplies, onboard repair parts, and accessory items aboard the vessel..
b. The Boat Set will be issued initially complete by ATCOM.
c.. Requisitions for replacement of component items will be submitted to the managing activity having
issue responsibility.
d. .When watercraft is transferred or returned to inactive status, the Boat Set will be complete and turned
in with the vessel.
2. Format of Technical Bulletin. This technical bulletin is divided into the following sections:
a. Section II - Operating Equipment. This section lists equipment necessary for the operation of the
vessel exclusive of accessory equipment.
b. Section III - Operating Supplies. This section lists operating supplies which are consumed in use,
exclusive of repair parts. They are required for the operation, maintenance, health and welfare of the crew.
c. Section IV - On Board Repair Parts. This section lists repair parts issued and required on board the
vessel at all times when on active status. Due to configuration differences, it will be necessary to reflect hull
numbers where differences exist.
d. Section V - Accessory Items. This section lists accessory equipment on board which are installed by
the manufacturer or by the Issuing agency and are considered as a part of the basic configuration of the
vessel.
3. Excess Items. This bulletin does not constitute authorization for excessing or disposing of any operating
equipment, supplies, or on board spare parts which are currently on board or marked for this vessel. Excess
items will be exhausted by normal attrition. .
4. Composition of Technical Bulletin. The component listing within each section is in
alphabetical sequence
by item name and contains the following data:
a. National Stock Number (NSN). A number listed in this publication for use in all supply operations.
b. Description. The item descriptions included are listed in alphabetical sequence by item name, with
additional descriptive information required for identification:
(1) Manufacturer's Code, part numbers, and/or the applicable specification references.
(2) Pertinent information and notes applicable to the set follow the last component.
c. Quantity Per Set (Qty). This column lists the quantities of each component authorized.
d. Expendability - Recoverability (Rec) Code. This one digit code indicates the method or condition
under which the repair parts can be recovered. Absence of a code indicates the item is expendable. Codes
that appear are defined as follows:
Codes
Definition
Z
Non-repairable item. When unserviceable, condemn and dispose at
the level indicated by source, maintenance, and recoverability code.
O
Reparable item. When uneconomically repairable, condemn and
dispose at organizational level.
2