TM 1-4920-445-13&P
0005 00
WARNINGS
Stop plate cable assembly is a spring powered mechanism. Personal
INJURY OR DEATH may result if two quick release pins are not installed
in stop plates.
Fold-out floor counterbalance cables must be secured in cable housings
prior to raising shelter floor from its lowered position to its level position.
If counterbalance cables are not secured, counterbalance cables will
remain under tension. DO NOT attempt to remove cables if
counterbalance cables are not secured. Removing cables while under
tension could cause SERIOUS INJURY to personnel.
6. Remove lockout pins (4) from upper position on both cable reels (3).
7. Close slide stops (1) against counterbalance cables (2) on both cable reels (3).
8. Replace lockout pins (4) in lower position on both cable reels (3).
0005 00-5
