TM 5-1940-322-10
0004 00
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS (Contd)
AM HYDROJET HATCH COVERS--The hydrojet hatch covers, located between aft
cockpit and transom, are opened and closed as follows:
1. To open either hydrojet hatch, raise securing brace into slotted groove, and
lower hydrojet hatch on securing brace. Place pin through retaining hole and
securing brace on hydrojet hatch.
2. To close, raise either hydrojet hatch, remove pin, lower securing brace from
slotted groove, then lower hydrojet hatch to closed position.
AM
SLOTTED
GROOVE
PIN
SECURING
BRACE
OPENED AND SECURED POSITION
0004 00-15
