TM 5-1940-322-10
0035 00
LONGITUDINAL RAFTING (Contd)
WARNING
Crewmembers must keep hands and feet from between raft
and boat when installing rafting brackets. Failure to comply
may result in serious injury or death to personnel.
NOTE
Rafting brackets are stowed in the aft cockpit of BEB and
will be installed on raft by crewmembers.
3.
Crewmembers will remove quick release pin (2) on lanyard (3) from rafting
bracket.
4.
Align rafting bracket with load receiving pin receptacle (1) on outer ponton of
interior bay (4).
5.
Install quick release pin (2) on load receiving pin receptacle (1), and rafting
bracket. Ensure pin (2) on lanyard (3) is fully seated in rafting bracket.
6.
Repeat steps 3 through 5 for installation of remaining three rafting brackets.
2
1
3
~
4
RAFTING BRACKET
IRB RAFTING
BRACKET SHOWN
0035 00-2
