Lumbar adjustment buttons are located at the right rear of the operator's seat. Press (+) or (-) to either increase or
decrease support for:
The following adjustment controls are included in a bank of buttons located on the right-hand side of the operator's seat:
Seat Damper. Move button up to increase damping and down to decrease damping.
Seat Back Angle. Move button up and press on backrest to change angle.
Seat Height. Move button up to raise seat and down to lower seat. Release button when desired height is reached.
Squab Angle. Move button up and load or unload front of seat cushion.
Seat Lower/Raise. Move button up to move seat to lowest position and down to raise seat to previous position.
Seat Cushion Removal. Press button to allow seat cushion to be removed.
(10) Seat Cushion Forward/Backward. Move lever to adjust seat forward/backward to desired position.
The operator's seat incorporates a rotating mounting plate which allows the operator to face forward to drive and operate
the FEL, or to turn 180 degrees to face the rear and operate the backhoe. The mounting plate has a seat position detector
which automatically selects FEL mode or backhoe mode, depending on the position of the seat.