TM 55-1925-282-14&P
0002 00
Table 3. Fresh Water Flush Pump Technical Characteristics
Item
Data
Manufacturer ............................................................................................................................... Jabsco
Model ................................................................................................................................... PAR-MAX4
Type ...................................................................................................................................... Centrifugal
Rated Capacity .................................................................................. 10 gallons (37.9 liters) per minute
Maximum Pressure ....................................................................................................... 50 PSI (3.4 bar)
Continuous Working Pressure ...................................................................................... 40 PSI (2.8 bar)
Voltage ........................................................................................................................................ 24 Vdc
Amps .............................................................................................................................................. 10 A
CHARCOAL FILTERS
The charcoal filters remove sediment and odors from the fresh water used during flushing cycles. The charcoal
filters also block bromine and chlorine from passing into the reverse osmosis membranes. The charcoal filters
are secured when the ROWPU is making product water.
The technical characteristics of the charcoal filters are contained in table 4.
Table 4. Charcoal Filters Technical Characteristics
Item
Data
Manufacturer ................................................................................................. Sea Recovery Corporation
Model .................................................................................................................................. 0713020606
Type ............................................................................................................ 10 Micron Carbon Briquette
Maximum Pressure ....................................................................................................... 50 PSI (3.4 bar)
Continuous Working Pressure ...................................................................................... 40 PSI (2.8 bar)
FLOW CONTROL PANELS
The flow control panels provide the operator with the indicators needed to monitor the quantity and quality of
product water. They also provide the primary control needed to vary overall system pressure. It is the central
connection point for all mechanical lines in the ROWPU system.
The technical characteristics of the flow control panels are contained in table 5.
Table 5. Flow Control Panels Technical Characteristics
Item
Data
Manufacturer .................................................................... Water & Power, Inc. (The Watermaker Store)
Model .............................................................................................................. WAT-05MH3-776221350
Type ........................................................................................................... Mil-Type Flow Control Panel
0002 00-4
