TM 55-1925-282-14&P
0016 00
3
1
5
5
2
6
7
4
Figure 1. Filter Assembly
ASSEMBLY
1. Install a new filter element (figure 1, item 7) in the filter housing (figure 1, item 4).
2. Lubricate the new O-ring (figure 1, item 6) with silicone lubricant, and install it on the filter housing lid
(figure 1, item 2).
3. Place the filter housing lid (figure 1, item 2) on top of the filter housing (figure 1, item 4) and push the lid down
into the filter housing.
4. Place the lid retaining ring (figure 1, item 3) in position over the filter housing lid (figure 1, item 2), and rotate
clockwise until snug.
5. Remove the lockouts and tagouts (FM 55-502).
6. OPEN the air release valve (figure 1, item 1).
7. Perform a fresh water flush (WP 0005 00) on the ROWPU with the air release valve (figure 1, item 1) OPEN
on the serviced filter.
0016 00-2
