TM 55-1925-283-12&P
0013 00
1
2
NOTE
Approximately 6 to 7 gallons (22.7 to 26.5 liters) of fuel will be drained from the upper
ball valve. Ensure that sufficient drain capacity is available.
3. OPEN the upper ball valve (figure 1, item 2) and drain the fuel until the flow slows to a dribble.
4. CLOSE the upper ball valve (figure 1, item 2).
5. Press IN on the safety catch (figure 2, item 1) and pull OUT on the release lever (figure 2, item 2) to release
the retainer clamp (figure 2, item 3). Set aside the retainer clamp.
6. Remove the lid (figure 2, item 4) and O-ring (figure 2, item 5). Discard the O-ring.
7. Remove the cap screw (figure 2, item 6) securing the first filter element (figure 2, item 7).
8. Remove the first filter element (figure 2, item 7) using a twisting, upward motion.
9. Remove the remaining nine filter elements (figure 2, item 7) by repeating steps 7 and 8 above.
0013 00-2