TM 55-1925-284-14&P
0025 00
3
2
1
4
Figure 1. Pump Motor and Junction Box
WARNING
Replace or repair components only after the affected circuit has been secured,
locked out, and tagged out. Performing replacement with the circuit energized
may result in injury.
2. Use a multimeter to check for voltage at the wiring (figure 1, item 4). If voltage is present, ensure that the
proper circuit breaker is secured, locked out, and tagged out (FM 55-502). If no voltage is present, continue
with the procedure.
3. Label, disconnect, and remove the wiring (figure 1, item 4) from the junction box (figure 1, item 3).
0025 00-2