TM 55-1925-284-14&P
0031 00
WARNING
Sewage is a common mode of transmission for parasitic organisms that may
have the capability of causing communicable diseases. After coming in contact
with sewage or contaminated equipment, be sure to clean yourself with a disin-
fectant soap. Avoid sewage contact with skin abrasions, punctures, cuts, and
other open wounds. Wipe up and clean any spills and/or contaminated equip-
ment using a disinfectant soap.
7. Loosen the chlorinator discharge coupling (figure 2, item 1) and allow any effluent to drain into the suitable
drain pan.
8. Place the suitable drain pan under the wet well inlet coupling (figure 2, item 2).
9. Loosen the wet well inlet coupling (figure 2, item 2) and allow any effluent to drain into the suitable drain pan.
10. Remove the pipe (figure 2, item 3) from the wet well inlet coupling (figure 2, item 2) and the chlorinator
discharge coupling (figure 2, item 1).
11. Place the suitable drain pan under valve MSD-11 WET WELL SAMPLE (figure 2, item 4).
12. Remove the pipe plug (figure 2, item 5) from valve MSD-11 WET WELL SAMPLE (figure 2, item 4).
WARNING
Sewage is a common mode of transmission for parasitic organisms that may
have the capability of causing communicable diseases. After coming in contact
with sewage or contaminated equipment, be sure to clean yourself with a disin-
fectant soap. Avoid sewage contact with skin abrasions, punctures, cuts, and
other open wounds. Wipe up and clean any spills and/or contaminated equip-
ment using a disinfectant soap.
13. OPEN valve MSD-11 WET WELL SAMPLE (figure 2, item 4) and allow any effluent to drain into the suitable
drain pan.
14. Remove valve MSD-11 WET WELL SAMPLE (figure 2, item 4) and the piping (figure 2, item 6) from the wet
well (figure 2, item 7).
15. Place the suitable drain pan under the wet well discharge coupling (figure 2, item 8).
16. Verify that valve MSD-10 WET WELL DISCHARGE (figure 2, item 9) is CLOSED.
0031 00-3