TM 55-1925-286-13&P
0030 00
Source Code. The source code tells you how you get an item needed for maintenance, repair, or overhaul of an
end item/equipment. Explanations of source codes follow:
Source Code
Application/Explanation
PA
Stock items; use the applicable NSN to requisition/request items with these source
PB
codes. They are authorized to the level indicated by the code entered in the 3rd
PC
position of the SMR code.
PD
PE
NOTE
PF
Items coded PC are subject to deterioration.
PG
KD
Items with these codes are not to be requested/requisitioned individually. They
KF
are part of a kit which is authorized to the maintenance level indicated in the 3rd
KB
position of the SMR code. The complete kit must be requisitioned and applied.
MO-Made at unit/AVUM level
Items with these codes are not to be requisitioned/requested individually. They
MF-Made at DS/AVIM level
must be made from bulk material which is identified by the P/N in the DESCRIP-
MH-Made at GS level
TION AND USABLE ON CODE (UOC) column and listed in the bulk material
ML-Made at SRA
group work package of the RPSTL. If the item is authorized to you by the 3rd
MD-Made at depot
position code of the SMR code, but the source code indicates it is made at
higher level, order the item from the higher level of maintenance.
AO-Assembled by unit/
AVUM level
Items with these codes are not to be requested/requisitioned individually. The
AF-Assembled by DS/AVIM
parts that make up the assembled item must be requisitioned or fabricated and
level
assembled at the level of maintenance indicated by the source code. If the 3rd
AH-Assembled by GS level
position of the SMR code authorizes you to replace the item, but the source
AL-Assembled by SRA
code indicates the item is assembled at a higher level, order the item from the
AD-Assembled by depot
higher level of maintenance.
XA
Do not requisition an "XA" coded item. Order the next higher assembly.(Refer to
NOTE below.)
XB
If an item is not available from salvage, order it using the CAGEC and P/N.
XC
Installation drawings, diagrams, instruction sheets, field service drawings; iden-
tified by manufacturer's P/N.
XD
Item is not stocked. Order an XD-coded item through normal supply channels
using the CAGEC and P/N given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a
source of supply for items with the above source codes except for those items
source coded "XA" or those aircraft support items restricted by requirements of
AR 750-1.
Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair support
items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:
Third Position. The maintenance code entered in the third position tells you the lowest maintenance level autho-
rized to remove, replace, and use an item. The maintenance code entered in the third position will indicate
authorization to the following levels of maintenance:
0030 00-2
