TM 55-4920-390-13&P
b) Replace hand-held lamp in case nesting it in foam pad as provided.
Coil its cable loosely around back of lamp. (See Fig. 1-5).
c) Close and latch case. (See Fig. 1-1, a). Strobex is now sealed and ready for storage, or
carrying by its convenient handle.
d) For prolonged storage it is recommended that dessicant packages be dropped in the case.
3-5. PREPARATION FOR SHIPMENT. Prepare the Strobex for shipment as follows -
a) Secure unit as in 3-6 above.
b) Place unit in cardboard carton with AT LEAST 2" clearance on each side (4" larger in each
dimension).
c) Cushion all sides and top and bottom with suitable material such as rubberized hair, plastic foam,
plastic foam chips, etc.
NOTE
The unit can be shipped configured as in Fig. 1-1, a, but for added protection and to save
exterior of case from abuse, it is recommended that it be prepared as in 3-5, c.
d) Preservation, packaging, packing, and marking requirements for reshipment of the Strobex must
3-2