TM 9-2320-209-10-1
FRAME 8
1.
To suction fill tank sections:
Take off padlock (1), lift cover clamp (2), and open filler cover (3) of tank
(a)
section to be filled.
Place nozzle (4) into filler hole, press operating lever (5), and fill tank
(b)
with amount of water required.
(c)
Use water level gage (6) (in rear compartment) to measure amount of water
in rear section or water level gage (7) to measure amount of water in front
section of tank.
(d)
GO TO FRAME 9
4-168