TM 9-2320-209-10-1
FRAME 3
WARNING
Make sure collapsible cable reel (1) is properly mounted on rear
winch shaft before operating reel. DO not overload cable reel.
Maximum pull on reel must not be more than 4, 000 pounds.
Stand clear of reel and cable during operation. Do not touch
cable unless absolutely necessary. Wear leather gloves to
avoid injury.
CAUTION
Make sure ends of cable are made fast before installing or
removing cable from reel. If the cable gets tangled it could
cause damage to equipment.
1.
Collapse cable reel (1) by turning operating handle (2) left until sliding spider (3)
separates from handle.
Push in sliding spider (3) to completely collapse cable reel (1). Wire coil may now
2.
be placed onto or taken off of rim segments (4).
Pull sliding spider (3) forward and turn operating handle (2) right to mesh with
3.
spider. Continue to turn handle as far as it will go.
GO TO FRAME 4
4-375
