TM 9-2320-211-10-1
I
FRAME 6
To shift from first gear to second gear, make sure that condition of truck is:
1.
Engine running.
Handbrake off.
Clutch pedal up.
FRONT TRANSMISSION gearshift lever in position 1.
TRANSFER CASE lever in LOW or HIGH position.
Truck moving forward,
Accelerator pedal pressed down a little.
CAUTION
Shift to next highest gear position when truck has reached
a speed just below maximum shown on data plate for the posi
tion being used. Shifting too soon or too late causes extra
heavy wear on engine, transmission and other parts of the
vehicle.
(a)
When truck speed shown on speedometer (1) or tachograph (2) is just
below maximum speed shown on data plate ( 3) for first gear, step on
clutch pedal ( 4) and press it all the way down.
Let accelerator pedal (5) up.
(b)
Move the FRONT TRANSMISSION gearshift lever (6) to position 2.
(c)
(d)
Let clutch pedal (4) up slowly, press down on accelerator pedal (5),
bring truck to just below maximum speed for second gear.
(e)
Do steps l(a) through l(d) again to shift to third, fourth, and fifth gear.
GO TO FRAME 7
.
CAUTION! DO NOT EXCEED!
MAXIMUM ROAD SPEED IN MPH
TRANSMISSION
TRANSFER CASE
LOW
HIGH
26
FIFTH (DIRECT)
53
18
36
FOURTH
10
21
THIRD
6
13
SECOND
3
7
FIRST
3
7
REVERSE
4-52