TM
9-2320-211-10
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services (Cont'd)
NOTE: These checks are to be made in the order listed, within designated interval.
B-Before operation
D-During operation
A-After operation
W-Weekly
M-Monthly
ITEM TO BE INSPECTED
INTERVAL
ITEM
EQUIPMENT IS
PROCEDURE: Check for and
NO.
NOT READY
have repaired, filled, or adiusted
AVAILABLE IF:
as needed
SPECIAL BODY EQUIPMENT
FRONT WINCH
26
Cable frayed, kinked, or
a. While operating front winch, check condition
broken (if winch oper-
of wire rope, hooks, and cable chain installation.
ation is required for
mission).
Winch does not operate
b. While operating front winch, check that drum
properly (if winch oper-
lock knob (4) and drum clutch lever (3) operate
ation is required for
properly. Also, that level wind lack knob (2) on
winches so equipped, operates properly.
mission).
c. Clean wire rope and check shearpin (5) for
presence and condition. (Shearpin connects U-joint
yoke and winch drive shaft. It is retained with
cotter pins (6)).
d. Check PTO and drive shaft for mounting
M748A1 MIDSHIPS WINCH
27
NOTE
Front and midships winch controls are
identical. Follow front winch operation
checks a and b for M748A1 midships
winch.
TA 096317
3-16.1