TM 9-2320-269-10
STARTING AND WARM-UP AT TEMPERATURES ABOVE 400 F (4.60 C) - CONTINUED
CAUTION
To avoid damage to the starter motor, do not hold the starter key switch longer than 30 seconds.
If the engine fails to start within 30 seconds, release the key switch and wait 60 seconds to allow
the starter motor to cool before using it again.
NOTE
If, after not more than four repeat starting operations, the engine fails to start, check for the
reason, using the troubleshooting procedures in this manual, or notify organizational maintenance.
NOTE
As soon as engine starts, release starter key switch and reduce engine speed to a low idle.
11.
Turn key switch (3) to start position (8), and hold it while starter motor engages and rotates the engine
crankshaft. Release key switch (3) the instant engine starts and reduce engine speed to idle.
Change 1 2-64