TM 9-2320-269-10
PUTTING THE M876 TRUCK IN MOTION
Before the M876 truck Is moved, make sure all instruments, indicators, engine, and all other vehicle functioning sources
have been safety checked, set and adjusted. If you cannot operate the vehicle you cannot perform the mission.
1.
Check List - Before putting vehicle in motion be sure that:
a.
All Before (B) PMCS were performed.
b.
Front winch (1), equipment (2), and tools (3) are locked and stowed for travel. See pages 1-19 and 1-
20.
c.
You have adjusted your driver's seat (4) and secured seat belts (5).
d.
Start the engine and allow it to warm up. See pages 2-6(1) through 2-65.
TA 222580
2-84
