TM 9-2320-269-10
TROUBLESHOOTING TABLE - CONTINUED
ELECTRICAL SYSTEM - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
One or more light systems will not work.
Step 1.
Check position of master selector control handle (1), on switch (2).
a.
Push in and move selector control handle (1) to the lighting service position desired on
switch (2).
b.
Make sure dash panel light switch control (3) is pulled out.
Step 2.
If lights fail to come one, turn key switch (4) to OFF position, and check fuse panel (5) for possible
blown fuse.
a.
Replace defective fuse.
b.
Turn key switch (4) to ON position (6).
Step 3.
If lights fail to come on, notify organizational maintenance.
TA 222676
3-13