TM
9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
NOTE
If longer cord is needed for work lights, do steps (7)
through (11).
Both work lights are removed in the same way.
q
(7) Remove worklamp harness from stowage.
(8) Pull quick pin (7) from work light (6).
(9) Lift work light (6) out of bracket (8) and disconnect cord (9) from work
light.
(10) Unwrap cord (9) from hooks.
(11) Connect worklamp harness connectors (10) to work light (6) and
cord (9).
NOTE
Do steps (12) through (15) if worklamp harness is no
q
longer needed.
q Both work lights are installed the same way.
(12) Disconnect worklamp harness connectors (10) from work light (6) and
cord (9).
2-64
