TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
NOTE
Right and left towing shackles are removed the same way.
(3) Remove two cotter pins (3), pins (4) and towing shackles (5) and stow on equipment body floor.
(4) Pull LIFT CYLINDER control lever (6) to lower crosstube (7) to approximately 3 ft (1 m) above ground.
(5) Position wrecker so that crosstube (7) is approximately 1 ft (30 cm) from tow eyes of disabled vehicle
and centered on disabled vehicle.
Change 2 2-186.21
