TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(23) Remove two 16-ft (5 m) safety chains (24) from stowage.
CAUTION
Route chain between brake line and axle or damage to
brake line will result.
(24) Route one safety chain (24) over front axle (23) on disabled vehicle.
(25) Hook safety chain (24) together in front of axle (23).
(26) Repeat steps (24) and (25) for other side of disabled vehicle.
(27) Pull safety chain (24) tight and install chain on adapter grab hook (25).
(28) Repeat step (27) for other side of disabled vehicle.
(29) Release PARKING BRAKE on disabled vehicle (refer to M35 operator's
manual).
(30) Alternately push in TOW
and LIFT CYLINDER control levers until tow
cylinders (2) are fully retracted.
(31) Push in LIFT CYLINDER control lever to retract lift cylinder (26) until
slack is removed from safety chains (24).
2-205