TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(20) Position wrecker so adapters (15) contact front bumper (20) of disabled
vehicle and are centered.
CAUTION
Do not contact pintle hook with lift cylinder or
equipment damage could occur.
(21) Soldier A operates retrieval controls while Soldier A and Soldier B
guide adapters (15) down and under disabled vehicle front bumper (20)
until belt brace (21) is even with front edge of front bumper.
(22) Route 12-ft (3.5 m) tow chain (22) over A-frame rear member (23).
(23) Route 12-ft (3.5 m) tow chain (22) through lower adapter tube (24).
Pull chain tight and attach grab hook (25) to chain.
(24) Repeat steps (22) and (23) for other side of disabled vehicle.
(25) Release PARKING BRAKE on disabled vehicle (refer to M 151 operator's
manual).
2-283
