TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-78. TOW M520 (CONT).
Front and rear sections pivot. Use extreme care when
placing roll stops in roll joint. Hands could become
pinched in roll joint causing serious injury.
NOTE
Disabled vehicle roll stops must be in unlocked
position before installing towing roll stops.
Right side shown.
Position towing roll stop (40) in roll joint (41) flat side out.
(36)
Attach grab hook (42) to ear on towing roll stop (40).
(37)
Pull strap (43) under roll joint (41) and attach to other towing roll
(38)
stop (40).
(39) Prepare disabled vehicle for towing (refer to M520 operator's manual).
2-330