TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(8) Remove two nuts (5), washers (6), screws (7), and brackets (8) from
emergency tow lights (4). Stow emergency tow lights and brackets.
(9) Remove and stow two cross chains (9) and two tow chains (10).
(10) Unwrap two springs (11) from crosstube (12) and connect to tow
cylinders (13).
CAUTION
Do not contact pintle hook with lift cylinder or damage
to equipment could occur.
(11) Using retrieval controls, fully retract tow cylinders (13) and retract lift
cylinder (14) to raise crosstube (12) approximately 2 ft (60 cm) from
ground.
2-387
