TM
9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
TOW M880 (CONT).
2-79.
CAUTION
Do not contact pintle hook with lift cylinder or damage
to equipment could result.
(11) Pull TOW CYLINDER control levers and LIFT
CYLINDER control lever
to extend tow cylinders (12) and lift cylinder (13) until 12-ft (3.5 m)
tow chain (14) is slack and adapters (15) rest on ground.
(12) Remove and stow two 12-ft (3.5 m) tow chains (14).
CAUTION
Do not contact pintle hook with lift cylinder or damage
to equipment could occur.
(13) Using retrieval controls, fully retract tow cylinders (12) and retract lift
cylinder (13) to raise crosstube (11) approximately 2 ft (60 cm) from
ground.
2-408