TM 9-2320-279-10-2
M98E1 General Operating Procedures (Cont)
(37) Route other end of tow light cable (38) along disabled vehicle and
connect to rear electrical connector (39) on wrecker.
NOTE
If disabled vehicle is equipped with built-in steering
lock assembly, lock disabled vehicle's steering (refer to
M966 operator's manual).
(38) Set POWER switch (40) to ON position.
(39) Set HIGH IDLE switch (41) to CONTINUOUS.
(40) Push and release LATCH switch (42). Engine speed will increase to
approximately 1500 rpm.
2-557
