TM 9-2320-285-10
2-12. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (Continued)
Table 2-1. Operator PMCS (Continued)
B - Before
D - During
A - After
W - Weekly
M - Monthly
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: Check for and have repaired,
Equipment is Not
NO
B
D
AWM
filled, or adjusted as neededReady/Available If:
7
HYDRAULIC RESERVOIR (Continued)
Check for leaks or damage at the
Any Class III leaks
reservoir and loose or damaged
or fluid level below
fittings and hoses. Be sure fluid
bottom of reservoir
level is at or slightly above
screen.
bottom of reservoir screen (Ref
8
FIFTH WHEEL
WARNING
Never operate FIFTH WHEEL
UNLATCH CONTROL or allow
anything to touch it while
tractor is in motion.
Failure to follow this
procedure may result in
serious injury.
a. Check lift cylinders for leaks
Cylinders or lines ar
and damaged hydraulic lines and
inoperative or
fittings (Ref page 3-25)
leaking.
b After engine has been started
Air cylinder is
and air pressure is u p: check air
inoperative or
cylinder for proper operation,
leaking.
air leaks, and damaged lines.
9
AXLES
WARNING
After operation, drive axle
and differential may be very
hot. Do not touch them with
your bare hands.
a. Check front hub oil level
Class III leak.
(Ref LO 9-2320-285-12)
2-30
