TM 9-2320-285-10
3-4.
TROUBLESHOOTING TABLE (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8. EXCESSIVE ENGINE EXHAUST SMOKE (Continued)
Step 3. Check if restriction indicator red band is visible.
a. If red band is visible, press reset button on top of indicator
and check that red band disappears from view. (If red band does
not disappear from view, notify organizational maintenance that
restriction indicator is defective.) Crank engine and check if
red band reappears; if red band is visible, air cleaner element
is clogged (notify organizational maintenance).
b. If red band is not visible, notify organizational maintenance.
9. ENGINE WILL NOT SHUT DOWN
Check if engine stop button is pushed.
a. If engine stop button
is not pushed, push in
and hold button until
engine stops.
b. If engine stop button
is pushed, idle engine,
place gear shift lever
in neutral (N) position, pull PARKING BRAKE valve out to
apply brakes, and notify organizational maintenance.
10. TRANS/TORQUE CONVERTER LIGHT IS ON
Step 1. Stop tractor, shift transmission to neutral (N), and run engine at 1200 to 1500 RPM for three minutes.
a. If TRANS/TORQUE CONVERTER light goes out, problem was temporary
overheating due to maximum capacity load.
b. If TRANS/TORQUE CONVERTER light does not go out, go to step 2.
3-14
